Total Body Cooling and Warming
Tecotherm Neo utilizes an innovative servo controlled design with instant feedback, monitoring the infant’s temperature every 2 seconds and making minute changes to the cooling fluid to ensure that the infant’s temperature remains stable. Simple alarms on the Tecotherm Neo alert staff should the temperature deviate more than 0.5°C from the set temperature. The large colour display shows the temperature clearly and colour changes alert nursing staff to any problem.
With several new features, the Tecotherm Neo can be programmed for a complete treatment cycle. The user can set the target temperatures, duration and even the rate of re-warming / cooling, thereby making it easy and simple to set up and use. Changes can be made at any time and all changes, set and measured parameters are recorded on to a memory card, every minute, for later analysis
Product Information
| Features |
|---|
| 3 modes of operation for maximum flexibility in use |
| Clinician can set and adjust parameters at the start and throughout treatment |
| Data storage for allowing simple analysis of temperature profiles |
| USB output to CSV |
| Large colour screen is easy to see across the room |
| Small / Lightweight portable device |
| Internal battery restarts from same settings in event of power failure |
| Smooth, linear rewarming |
| Compatible with reusable or disposable accessories |
| Optional use of skin probes |
| Maintains normothermia after rewarming |
| Specifications |
|---|
| Options: Cooling &Warming |
| Patient weight max: <50 kg |
| Dimension: 375 mm x 190 mm / 215 mm x 310 mm |
| Weight without accessories: approx 7.2 kg |
| Central cooling module: Thermoelectrically based module |
| Hydraulic circulation system |
| System pressure max. 0,5 bar |
| Flow rate without / with mattress 500 ml / min (shorted) / up to 300 in use |
| Internal fluid reservoir capacity approx. 250 ml |
| Circulating fluid Sterile Water |
| Connectors / Couplings Quick Disconnect Couplings |
| Fill up / Refill Fill up set |
| Electrical Paarameters |
| Supply voltage / Mains 100-130V and 200-240V, 50-60 Hz |
| Power consumption max. 350 W |
| Patient safety / alarms |
| Lower temperature alarm limit +10°C |
| Upper temperature alarm limit +41°C |
| Set temperatures, lower limit +12°C |
| Set temperatures, upper limit +39°C |
| Ambient conditions |
| Operation / Treatment (Ambient Temperatures) + 5°C to + 27°C |
| Operation / Treatment 10% to 75%, not condensating Relative Humidity |
| System safety |
| Protection class Class 1, Risk Class II b, (Type BF) |
| Standards: DIN EN 60601-1 |
| DIN EN 60601-1-2 |
| DI 60601-1-6 |
| DIN EN 60601-1-8 |
| DIN EN 60601-1-10 |
| DIN EN 60601-2-35 E/F |
